Our Services
Expert BMW Motorrad Knowledge
BEMRR Wizard offers services ranging from a minor service through to major servicing. Specialist electrical diagnosis, individual and completely custom coding options not available anywhere else. Software updates and service light resets. Using only factory tooling and software.
BMW Motorrad Servicing
Minor, Annual, Major
All your BMW Motorrad Servicing covered from minor services, annual services and major services including valve clearance inspection, spark plug replacement, brake fluid replacement and fork oil replacement.
Specialist Electrical Troubleshooting
Factory Trained with intimate knowledge
The BMW Motorrad range is the most technologically advanced motorcycle range in the world. Utilizing the CAN BUS system, understanding the inner workings of this system are crucial to electrical fault finding.
Software Updates & Service Light Resets
Factory Tooling & Software
Here at BEMRR Wizard we only use factory tooling. This allows us to provide factory software updates and clear both the distance and time based service lights.
Remote Coding
I am now pleased to offer remote coding services to most customers. Remote coding is subject to a ping test. If the ping is too high then it must be done locally on your machine. If the ping is acceptable, I can do it on my end. I can code your TFT options with the motorcycle at your home garage remotely. There is a few things you will need though to make this possible.
1. ENET Cable (Cheap on eBay)
2. USB to Ethernet Adapter (If you don't have an ethernet port)
3. Battery Charger (Not a trickle charger)
4. A Windows Laptop or PC (Can be a MAC but needs a bootable Windows Install)
5. A working internet connection via Wi-Fi or Ethernet
6. Download and install Anydesk software on your PC
7. Minimum TFT firmware version 022_007_020 (pre 23 models)
The basic principle of how this works is for you to plug the ENET cable into the OBD port on your motorcycle. Then plug the ethernet plug into your Laptop or PC. Connect the battery charger to the motorcycle. Turn your motorcycle ignition on. Then Open Anydesk on your PC and provide me your ID. I will then connect to your PC remotely. I will then proceed to connect to your motorcycle and begin coding. The coding will take less than 30 minutes. In most cases it will be around 10 minutes if everything goes smoothly.
If this is something you are interested in then please get in contact with me. Let me know what model of bike you have and what options you want coded.
NCD 2.0 Coding
Full support available for all BMW Motorrad Models with NCD 2.0 Secure Coding.
If your GS911 can’t code your bike.
Send me a message.
ECU Cloning Available
If you have a damaged ECU and have purchased a second hand replacement, your old ECU can be cloned to the new ECU so it will act like a direct replacement. No need to replace with a brand new one. This minimises the cost involved with ECU replacement.
Please get in contact if you require this service.
ECU Tuning / Flashing
If you require a full exhaust system, headers or ECU flash please get in contact. I am an official reseller for S1000K Racing tuning products and can assist with supply and install. You can also contact them directly via their website.